- 吳文偉
- 韋光華
- 陳三元
- 張立
- 張翼
- 吳耀銓
- 林宏洲
- 陳智
- 柯富祥
- 吳樸偉
- 徐雍鎣
- 陳軍華
- 劉典謨
- 曾院介
- 林欣杰
- 黃爾文
- 鄒年棣
- 王誠佑
- 黃彥霖
- 鍾采甫
- 林御專
- 朱英豪
- 曽根 正人
- 朝春光
- 林健正
- 呂志鵬
-
Formation of Ha¨gg Carbide in an Fe-30Mn-10Al-4Cr-0.45C Alloy.
YiHsuan Tuan, ChuenGuang Chao and TzengFeng Liu (2010, Apr). Formation of Ha¨gg Carbide in an Fe-30Mn-10Al-4Cr-0.45C Alloy . Materials Transactions, Vol. 51, No. 6 pp. 1168 to 1172.
-
Relationship between Microstuctures and Tensile Properties of an Fe-30Mn- 8.5Al-2.0C Alloy.
Chih Lung Lin, chuen Guang Chao, Hui Yum Bor, Tzeng Feng liu (2010, Apr). Relationship between Microstuctures and Tensile Properties of an Fe-30Mn- 8.5Al-2.0C Alloy. Materials Transactions, Vol. 51, No. 6 pp. 1084-1088.
-
Relationship between Microstuctures and Tensile Properties of an Fe-30Mn- 8.5Al-2.0C Alloy.
Chih Lung Lin, chuen Guang Chao, Hui Yum Bor, Tzeng Feng liu (2010, Apr). Relationship between Microstuctures and Tensile Properties of an Fe-30Mn- 8.5Al-2.0C Alloy. Materials Transactions, Vol. 51, No. 6 pp. 1084-1088.
-
Fabrication of bismuth oxide-tin oxide nanowires by direct thermal oxidation of Bi-Sn eutectic nanowires.
Shih-Hsun Chen, Chiu-Yen Wang, Tzeng-Feng Liu,Chuen-Guang Chao (2010, Aug). Fabrication of bismuth oxide-tin oxide nanowires by direct thermal oxidation of Bi-Sn eutectic nanowires. Materials Letters, Vol. 64, pp. 2502-2504.
-
Influence of Rhenium on the Mechanical Behavior and Fracture Mechanism of a Fine-Grain Superalloy at Elevatee Temperatures.
Jian-Hong Liao, Hui-Yun Bor, Chuen-Guang Chao, Tzeng-Feng Liu (2011, Jan). Influence of Rhenium on the Mechanical Behavior and Fracture Mechanism of a Fine-Grain Superalloy at Elevatee Temperatures. Materials Transactions.
-
Effects of equal channel angular extrusion on the microstructure and high- temperature mechanical properties of ZA85 magnesium alloy.
Che-Yi Lin, Hao-Jan Tsai, Chuen-Guang Chao, Tzeng-Feng Liu (2012, Apr). Effects of equal channel angular extrusion on the microstructure and high- temperature mechanical properties of ZA85 magnesium alloy. Journal of Alloys and Compounds, Vol. 530 pp. 48-55.
-
Investigation of the microstructures and Mechanical Properties of the Mg- (2, 5, 8) wt.% Sn Alloys at High Temperatures After an ECAE Process.
Hao-Jan Tsai, Chin-Guo Kuo, Chuen-Guang Chao and Tzeng Feng Liu (2012, May). Investigation of the microstructures and Mechanical Properties of the Mg- (2, 5, 8) wt.% Sn Alloys at High Temperatures After an ECAE Process. Advanced Science Letters, Vol. 8, pp. 599-604.. NSC 99-2221-E-009-036-MY3.
-
Effect of compressive stress on nickel-induced lateral crystallization of amorphous silicon thin films.
S.Y. Huang, H.L. Lin, C.G. Chao, T.F. Liu (2012, Aug). Effect of compressive
stress on nickel-induced lateral crystallization of amorphous silicon thin films.Thin Solid Films, Vol. 520 pp. 2984-2988. -
A novel high- strength, high-ductility and high-corrosion-resistance FeAlMnC low-density alloy.
Po-Chih Chen, Chuen-Guang Chao, Tzeng-Feng Liu (2013, Feb). A novel high- strength, high-ductility and high-corrosion-resistance FeAlMnC low-density alloy. Scripta Materialia, 68, pp. 380-383. NSC 100-2221-E-009-053-MY3.
-
Effect of Temperature and Extrusion Pass on the Consolidation of Magnesium Powders Using Equal Channel Angular Exrrusion.
Hsiao-Chien Lee, Chuen-Guang Chao. Tzeng-Feng Liu, Che-Yi Lin and Hsiao- Chung Wang (2013, Mar). Effect of Temperature and Extrusion Pass on the Consolidation of Magnesium Powders Using Equal Channel Angular Exrrusion. Materials Transactions, 5,pp.765-768.
-
Enhanced ductility of the ZA85 magnesium alloy fabricated by equal-Channel angular pressing.
Che-yi Lin, Hui-Yum Bor, Chuen-Guang Chao*, Tzeng-Feng Liu (2013, Apr). Enhanced ductility of the ZA85 magnesium alloy fabricated by equal-Channel angular pressing. Journal of Alloys and Compounds, 556,pp.26-31.
-
Effect of ECAE on Microstructures and Mechanical Properties of Solution Heat Treated Mg-5(mass%) Sn Alloy.
Hao-Jan Tsai, Chin-Guo Kuo,Chuen-Guang Chao* and Tzeng-Feng Liu (2013, Jul). Effect of ECAE on Microstructures and Mechanical Properties of Solution Heat Treated Mg-5(mass%) Sn Alloy. Materials Transaction, vol.54, no. 8 , pp.1423-1428. NSC 102-2221-E-009-041-MY3.
-
Deformation mechanism in ultrahigh-strength and high- ductility nanostructured FeAlMnC alloy.
Chih-Lung Lin, Chuen-Guang Chao, Jenh-Yih Juang, Jenn-Ming Ysmh. Tzeng- Feng Liu (2014, Jan). Deformation mechanism in ultrahigh-strength and high- ductility nanostructured FeAlMnC alloy. Journal of Alloys and Compounds, 586,pp.616-620. NSC 100-2221-E-009-053-MY3.
-
Conducting Ag/oligothiophene complex pastes through a simple quenching/chelation method.
Fang-Hsien Lu, Feng-Chih Chang, Mohamed-Gamal Mohamed, Fzeng-Feng Liu, Chuen-Guang Chao, Shiao-Wei Kuo (2014, Jul). Conducting Ag/oligothiophene complex pastes through a simple quenching/chelationmethod. Journal of Materials Chemistry C, 2,pp.6111-6118.
-
Preparation of superhydrophobic polyimide films modified with organosilicasol as effective anticorrosion coatings
Teng-Yuan Lo, Yi-Chia Huang, Yi-Nan Hsiao, Chuen-Guang Chao, Wha-Tzong Hwang (2014, Sep). Preparation of superhydrophobic polyimide films modified with organosilicasol as effective anticorrosion coatings. Surface & Coatings Technology, 258, pp.310-319.