- 吳文偉
- 韋光華
- 陳三元
- 張立
- 張翼
- 吳耀銓
- 林宏洲
- 陳智
- 柯富祥
- 吳樸偉
- 徐雍鎣
- 陳軍華
- 劉典謨
- 曾院介
- 林欣杰
- 黃爾文
- 鄒年棣
- 王誠佑
- 黃彥霖
- 鍾采甫
- 林御專
- 朱英豪
- 曽根 正人
- 朝春光
- 林健正
- 呂志鵬
-
Microstructural evolution and bonding mechanisms of the brazed Ti/ZrO2 joint using an Ag68.8Cu26.7Ti4.5 interlayer at 900 °C
Shen-Hung Wei and Chien-Cheng Lin* Microstructural evolution and bonding mechanisms of the brazed Ti/ZrO2 joint using an Ag68.8Cu26.7Ti4.5 interlayer at 900 °C J. Mater. Res., 29 [5] 684-694 (2014)
-
Effect of Zirconia Content on the Oxidation Behavior of Silicon Carbide/Zirconia/Mullite Composites J. Am. Ceram
Cheng-Yuan Tsai, Chien-Cheng Lin*, Avigdor Zangvil*, and Ai-Kang Li* Effect of Zirconia Content on the Oxidation Behavior of Silicon Carbide/Zirconia/Mullite Composites J. Am. Ceram. Soc., 81 [9] 2413–20 (1998)
-
Microscopic Mechanisms of Oxidation in SiC-Whisker-Reinforced Mullite/ZrO2 Matrix Composites
Chien-Cheng Lin*, Avigdor Zangvil*, and Robert Ruh* Microscopic Mechanisms of Oxidation in SiC-Whisker-Reinforced Mullite/ZrO2 Matrix Composites J. Am. Ceram. Soc., 82 [10] 2833–40 (1999)
-
Phase Evolution in Silicon Carbide–Whisker-Reinforced Mullite/Zirconia Composite during Long-Term Oxidation at 1000° to 1350°C
Chien-Cheng Lin*, Avigdor Zangvil*, and Robert Ruh* Phase Evolution in Silicon Carbide–Whisker-Reinforced Mullite/Zirconia Composite during Long-Term Oxidation at 1000° to 1350°C J. Am. Ceram. Soc., 83 [7] 1797–803 (2000)
-
Ti2ZrO Phases Formed in the Titanium and Zirconia Interface after Reaction at 1550ºC
Kun-Lin Lin and Chien-Cheng Lin* Ti2ZrO Phases Formed in the Titanium and Zirconia Interface after Reaction at 1550ºC J. Am. Ceram. Soc., 88 [5] 1268–1272 (2005)
-
Microstructural Evolution and Formation Mechanism of the Interface between Titanium and Zirconia Annealed at 1550°C
Kun-Lin Lin and Chien-Cheng Lin* Microstructural Evolution and Formation Mechanism of the Interface between Titanium and Zirconia Annealed at 1550°C J. Am. Ceram. Soc., 89 [4] 1400–1408 (2006)
-
Effect of Yittria on Interfacial Reactions Between Titanium Melt and Hot Pressed Yttria/Zirconia Composites at 1700º
Chien-Cheng Lin,* Yao-Wen Chang, Kun-Lin Lin, and Kun-Fung Lin. Effect of Yittria on Interfacial Reactions Between Titanium Melt and Hot Pressed Yttria/Zirconia Composites at 1700º J. Am. Ceram. Soc., 91 [7] 2321–2327 (2008)
-
Oxygen Diffusivities and Surface Exchange Coefficients in Porous Mullite/Zirconia Composites Measured by the Conductivity Relaxation Method
Hong-Da Ko and Chien-Cheng Lin* Oxygen Diffusivities and Surface Exchange Coefficients in Porous Mullite/Zirconia Composites Measured by the Conductivity Relaxation Method J. Am. Ceram. Soc., 93 [1] 176-183 (2010)
-
Compositional Dependence of Phase Formation Mechanisms at the Interface Between Titanium and Calcia-Stabilized Zirconia at 1550ºC
Yao-Wen Chang and Chien-Cheng Lin* Compositional Dependence of Phase Formation Mechanisms at the Interface Between Titanium and Calcia-Stabilized Zirconia at 1550ºC J. Am. Ceram. Soc., 93 [11] 3893–3901 (2010)
-
Microstructural evolution and bonding mechanisms of the brazed Ti/ZrO2 joint using an Ag68.8Cu26.7Ti4.5 interlayer at 900 °C
Shen-Hung Wei and Chien-Cheng Lin* Microstructural evolution and bonding mechanisms of the brazed Ti/ZrO2 joint using an Ag68.8Cu26.7Ti4.5 interlayer at 900 °C J. Mater. Res., 29 [5] 684-694 (2014)
-
Phase transformation and icrostructural development of zirconia/stainless steel bonded with a Ti/Ni/Ti interlayer for the potential application in solid oxide fuel cells
Shen-Hung Wei and Chien-Cheng Lin* Phase transformation and icrostructural development of zirconia/stainless steel bonded with a Ti/Ni/Ti interlayer for the potential application in solid oxide fuel cells, J. Mater. Res., 29 [8] 923-934 (2014)